Toyota 4Runner: Door Control Switch

Installation

INSTALLATION PROCEDURE 1. INSTALL DOOR CONTROL RECEIVER (a) Install the door control receiver with the bolt. Torque: 5.5 N·m {56 kgf·cm, 49 in·lbf} ...

Components

COMPONENTS ILLUSTRATION ...

Other materials about Toyota 4Runner:

Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE CYLINDER BOOT (a) Using a screwdriver, remove the cylinder boot from the rear disc brake cylinder. HINT: Tape the screwdriver tip before use. 2. REMOVE REAR DISC ...

Dtc Check / Clear
DTC CHECK / CLEAR 1. CHECK FOR DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes. (e) Check for DTCs. 2. CLEAR DTC ...