Toyota 4Runner: Window Defogger System
- Precaution
- Parts Location
- System Description
- System Diagram
- How To Proceed With Troubleshooting
- Operation Check
- Problem Symptoms Table
- Terminals Of Ecu
- Data List / Active Test
- Rear Window Defogger System does not Operate
Relay(for Windshield Deicer)
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. REMOVE DEICER RELAY (DEICER)
(a) Remove the deicer relay from the engine room relay block.
Text in Illustration
...
Precaution
PRECAUTION
1. IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs according to the specifications
of the vehicle. The expressions listed in the table below are ...
Other materials about Toyota 4Runner:
Installation
INSTALLATION
PROCEDURE
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
Torque:
5.5 N·m {56 kgf·cm, 49 in·lbf}
(b) Connect the connector.
2. INSTALL D ...
Torque Converter Clutch Pressure Control Solenoid Control Circuit Electrical
(Shift Solenoid Valve SLU) (P2759)
DESCRIPTION
The amount of current flow to the solenoid is controlled by the duty ratio* of
the ECM output signal. During the lock-up operation, if the duty ratio increases,
the lock-up hydraulic pressure increases.
HINT:
*: The duty ratio is the ratio ...
© 2016-2024 | www.to4runner.net
0.0074
0.0074