Toyota 4Runner manuals

Toyota 4Runner: Customize Parameters

CUSTOMIZE PARAMETERS

1. POWER DOOR LOCK CONTROL SYSTEM (See page )


2. WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Key System) (See page )


3. WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Smart Key System) (See page )


4. SMART KEY SYSTEM (for Entry Function) (See page )


5. LIGHTING SYSTEM (for Interior) (See page )


6. METER / GAUGE SYSTEM (See page )


7. SEAT BELT WARNING SYSTEM (See page )


8. AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) (See page )


9. POWER WINDOW CONTROL SYSTEM (See page )


10. SLIDING ROOF SYSTEM (See page )


11. WIPER AND WASHER SYSTEM (See page )


12. LIGHTING SYSTEM (for Exterior) (See page )


Vehicle Lift And Support Locations
VEHICLE LIFT AND SUPPORT LOCATIONS 1. NOTICE ABOUT VEHICLE CONDITION WHEN RAISING VEHICLE (a) The vehicle must be unloaded before jacking up or raising the vehicle. Never jack up or raise a heavil ...

Initialization
INITIALIZATION 1. PROCEDURES NECESSARY WHEN CABLE IS DISCONNECTED/RECONNECTED TO BATTERY TERMINAL Procedures Necessary when Cable is Disconnected/Reconnected to Battery Terminal Necessar ...

Other materials about Toyota 4Runner:

Tire Pressure Warning Light Circuit
DESCRIPTION If the tire pressure warning ECU detects a disconnected connector or an open circuit between the tire pressure warning ECU and combination meter, the tire pressure warning light turns off 10 seconds after the ignition switch is turned to ON, b ...

Invalid Data Received from Deceleration Sensor (C1442,C1443)
DESCRIPTION The skid control ECU receives signals from the yaw rate and acceleration sensor via the CAN communication system. DTC Code DTC Detection Condition Trouble Area C1442 An invalid data s ...

© 2016-2024 | www.to4runner.net

0.0257