Toyota 4Runner: Data List / Active Test
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Data List.
(e) According to the display on the Techstream, read the Data List.
Main Body|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Key Unlock Warning SW |
Unlock warning switch / ON or OFF |
ON: Key inserted into ignition key cylinder OFF: Key not inserted into ignition key cylinder |
- |
|
ACC SW |
Ignition switch status / ON or OFF |
ON: Ignition switch ACC OFF: Ignition switch off |
- |
|
IG SW |
Ignition switch status / ON or OFF |
ON: Ignition switch ON OFF: Ignition switch off |
- |
|
RR Door Courtesy SW |
Rear RH side door courtesy light switch signal / ON or OFF |
ON: Rear RH side door open OFF: Rear RH side door closed |
- |
|
RL Door Courtesy SW |
Rear LH side door courtesy light switch signal / ON or OFF |
ON: Rear LH side door open OFF: Rear LH side door closed |
- |
|
Back Door Open |
Back door lock position status / Permit or Prohibit |
Permit: Back door unlocked Prohibit: Back door locked |
- |
|
FR Door Lock Pos |
Front RH side door lock position switch signal / UNLOCK or LOCK |
UNLOCK: Front RH side door unlocked LOCK: Front RH side door locked |
- |
|
FR Door Courtesy |
Front RH side door courtesy light switch signal / ON or OFF |
ON: Front RH side door closed OFF: Front RH side door open |
- |
|
FL Door Lock Pos |
Front LH side door lock position switch signal / UNLOCK or LOCK |
UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
|
FL Door Courtesy |
Front LH side door courtesy light switch signal / ON or OFF |
ON: Front LH side door closed OFF: Front LH side door open |
- |
|
RR-Door Lock Pos SW |
Rear RH side door lock position switch signal / ON or OFF |
ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
|
RL-Door Lock Pos SW |
Rear LH side door lock position switch signal / ON or OFF |
ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Back Door Courtesy Switch |
Back door courtesy switch signal/ ON or OFF |
ON: Back door open OFF: Back door closed |
- |
2. ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Main Body|
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Hazard |
Turn signal flasher relay |
ON/OFF |
- |
|
Wireless Buzzer |
Wireless door lock buzzer |
ON/OFF |
- |
|
Door Lock |
Door lock motor |
LOCK/UNLOCK |
- |
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK
BODY ECU)
(a) Remove the main body ECU (multiplex network body ECU) (See page
).
(b) Measure th ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed
for that code. For details of the code, refer to the "See page" bel ...
Other materials about Toyota 4Runner:
Door Side Airbag Sensor RH Initialization Incomplete (B1693/81,B1698/82)
DESCRIPTION
The circuit for the side collision sensor LH or RH (to determine deployment of
the front seat side airbag LH or RH and curtain shield airbag LH or RH) is composed
of the center airbag sensor, rear airbag sensor LH or RH and side airbag sensor ...
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK DRIVER SIDE JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK
BODY ECU)
(a) Remove the main body ECU (multiplex network body ECU) (See page
).
(b) Measure the voltage and resistance according to the value(s) in the ta ...
0.0088