Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / PPS / Trouble codes.
(f) Read the DTCs foll ...
On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT INDICATOR LIGHT
(a) Check that the KDSS indicator light comes on for 2 seconds when the ignition
switch is turned to ON.
If the indicator check result is not normal, proceed to troubleshooting for the
Problem ...