Toyota 4Runner: Precaution
PRECAUTION
1. PRECAUTIONS FOR EACH FUNCTION
(a) Precautions for the key:
- The key is a precision instrument. Be sure to observe the following:
(1) Do not drop or strike the key.
(2) Do not keep the key in a high temperature area for a long time.
(3) Do not use an ultrasonic washing machine to clean the key.
(4) Keep the key away from magnets or magnetized items during use.
(5) Do not attach any stickers to the key.
(b) Precautions for the battery built into the key and the vehicle battery:
(1) When the door is being locked, the vehicle battery is used to transmit a
radio wave. The battery may be fully depleted if the vehicle remains stopped for
a long time. If the vehicle is not used for a long time, replace the transmitter
battery (See page .gif)
) or cancel the smart key system
(for Entry Function) (See page ).
(2) When the door is being locked with the key in the detection area of the door oscillator, the battery is used to regulate communication between the key and vehicle. If the vehicle is not used, keep the key away from the vehicle (more than 2 m (6.56 ft.)).
Parts Location
PARTS LOCATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
ILLUSTRATION
...
System Description
SYSTEM DESCRIPTION
1. WIRELESS DOOR LOCK CONTROL SYSTEM DESCRIPTION
(a) This system locks/unlocks the doors remotely. The wireless door lock control
system has the following features:
The ...
Other materials about Toyota 4Runner:
Installation
INSTALLATION
PROCEDURE
1. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
NOTICE:
The regulator arm must be below the intermediate position when installing the
rear power window regulator motor assembly.
(a) Using a T25 "TORX" sock ...
Open or Short in Master Cylinder Pressure Sensor (C1421,C1281,C1423,C1424)
DESCRIPTION
DTC Code
DTC Detection Condition
Trouble Area
C1421
Either condition is met:
Both of the following conditions continue for at least 1.2 seconds.
The IG1 terminal volta ...
0.0089