Press .
Each time is pressed, the
display changes in the following order:
Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time
About iPod
• Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
iPod functions
• When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used.
• Depending on the iPod that is connected to the system, certain functions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions.
iPod problems
To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it.
For instructions on how to reset your iPod, refer to your iPod Owner's Manual.
Error messages
“iPod ERROR”: This indicates a problem in the iPod, inside the USB box or the connection between them.
“NO SONGS”: This indicates that there is no music data in the iPod.
“UPDATE YOUR iPod”: This indicates that the version of the iPod is not compatible.
Compatible models
Depending on differences between models or software version etc., some models listed above might be incompatible with this system.
iPod 4th generation and earlier models are not compatible with this system.
iPhone, iPod mini, iPod shuffle and iPod photo are not compatible with this system.
Items related to standards and limitations are as follows:
• Maximum number of lists in a device: 9999 • Maximum number of songs in a device: 65025 • Maximum number of songs per list: 65025
CAUTION
Caution while driving
Do not connect iPod or operate the controls.
NOTICE
To prevent damage to iPod
• Do not leave iPod in the vehicle. The temperature inside may become high, resulting in damage to the player.
• Do not push down on or apply unnecessary pressure to the iPod while it is connected as this may damage the iPod or its terminal.
• Do not insert foreign objects into the port as this may damage the iPod or its terminal.
Data List / Active Test
DATA LIST / ACTIVE TEST
1. DATA LIST
Using the Techstream to read the Data List allows the values or states of switches,
sensors, actuators and other items to be read without removing any parts. This non-intrusive
inspection can be very useful because in ...
Airbag Signal Malfunction/Not Input (B15C4)
DESCRIPTION
If the DCM (Telematics Transceiver) detects an error in the communication between
the DCM (Telematics Transceiver) and center airbag sensor assembly as a result of
the DCM (Telematics Transceiver) self check, this DTC will be set.
...