Toyota 4Runner manuals

Toyota 4Runner: Voice Guidance does not Function

PROCEDURE

1.

CHECK VOICE GUIDANCE SETTING

(a) Display the "Voice Settings" screen.

(b) Check if the "Voice Recognition Prompts" is not "Off".

OK:

Malfunction disappears.


OK

END

NG

2.

CHECK AUDIO FUNCTION

(a) Check that sound can be heard from a front speaker.

OK:

Sound can be heard.


OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY


NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

Poor Sound Quality in All Modes (Low Volume)
PROCEDURE 1. CHECK AUDIO SETTINGS (a) Set "Treble", "Mid" and "Bass" to the initial values and check that sound is normal. OK: Malf ...

Voice is not Recognized
PROCEDURE 1. CHECK CONDITION (a) Check if the system voice recognition level is low when recognizing a particular voice. Result Proceed to ...

Other materials about Toyota 4Runner:

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for both the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT BUMPER BAR REINFORCEMENT LH (w/o Intuitive Parking Assist System) ...

Diagnosis System
DIAGNOSIS SYSTEM 1. DESCRIPTION (a) Lighting system data and the Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions an ...

© 2016-2025 | www.to4runner.net

0.0139