Toyota 4Runner: Data List / Active Test
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Data List.
(e) According to the display on the Techstream, read the Data List.
Main Body|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
ACC SW |
Engine switch status / ON or OFF |
ON: Engine switch on (ACC) OFF: Engine switch off |
- |
|
IG SW |
Engine switch status / ON or OFF |
ON: Engine switch on (IG) OFF: Engine switch off |
- |
|
RR Door Courtesy SW |
Rear RH side door courtesy light switch signal / ON or OFF |
ON: Rear RH side door open OFF: Rear RH side door closed |
- |
|
RL Door Courtesy SW |
Rear LH side door courtesy light switch signal / ON or OFF |
ON: Rear LH side door open OFF: Rear LH side door closed |
- |
|
Back Door Open |
Back door lock position status / Permit or Prohibit |
Permit: Back door unlocked Prohibit: Back door locked |
- |
|
FR Door Lock Pos |
Front RH side door lock position switch signal / UNLOCK or LOCK |
UNLOCK: Front RH side door unlocked LOCK: Front RH side door locked |
- |
|
FR Door Courtesy |
Front RH side door courtesy light switch signal / ON or OFF |
ON: Front RH side door closed OFF: Front RH side door open |
- |
|
FL Door Lock Pos |
Front LH side door lock position switch signal / UNLOCK or LOCK |
UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
|
FL Door Courtesy |
Front LH side door courtesy light switch signal / ON or OFF |
ON: Front LH side door closed OFF: Front LH side door open |
- |
|
RR-Door Lock Pos SW |
Rear RH side door lock position switch signal / ON or OFF |
ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
|
RL-Door Lock Pos SW |
Rear LH side door lock position switch signal / ON or OFF |
ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
|
Tester Display |
Measurement Item/Range |
Normal Condition |
Diagnostic Note |
|---|---|---|---|
|
Back Door Courtesy Switch |
Back door courtesy switch signal/ ON or OFF |
ON: Back door open OFF: Back door closed |
- |
2. ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Main Body|
Tester Display |
Test Part |
Control Range |
Diagnostic Note |
|---|---|---|---|
|
Hazard |
Turn signal flasher relay |
ON/OFF |
- |
|
Wireless Buzzer |
Wireless door lock buzzer |
ON/OFF |
- |
|
Door Lock |
Door lock motor |
LOCK/UNLOCK |
- |
Dtc Check / Clear
DTC CHECK / CLEAR
1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Smart Key / ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed
for that code. For details of the code, refer to the "See page" bel ...
Other materials about Toyota 4Runner:
Engine (ignition) switch (vehicles without a smart key system)
Starting the engine
Check that the parking brake is
set.
Check that the shift lever is
set in P.
Firmly depress the brake pedal.
Turn the engine switch to the
“START” position to start the engine.
Changing the engine switch positions
1. ...
Lost Communication with ECM (U0100,U0142,U0155)
DESCRIPTION
The air conditioning amplifier communicates with the ECM, main body ECU (multiplex
network body ECU) and combination meter through the CAN communication system.
DTC Code
DTC Detection Condition
Trouble Area
...
0.0259