Toyota 4Runner: Parking Brake Pedal

Removal

REMOVAL PROCEDURE 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS sys ...

Components

COMPONENTS ILLUSTRATION ILLUSTRATION ...

Other materials about Toyota 4Runner:

Inspection
INSPECTION PROCEDURE 1. INSPECT TIE ROD END SUB-ASSEMBLY (a) Install the nut. (b) Flip the ball joint stud back and forth 5 times as shown in the illustration. (c) Using a torque wrench, turn the nut co ...

Check Mode Procedure
CHECK MODE PROCEDURE NOTICE: Enter "Signal Check" from the "DTC Check" screen displayed on the Techstream to clear the output DTCs (both present and past). HINT: DTCs can be stored more sensitively in check mode than in normal ...