Toyota 4Runner: When driving
Toyota 4Runner Owners Manual / When driving
Driving, stopping and safe-driving information.
- Driving procedures
- Driving the vehicle
- Engine (ignition) switch (vehicles without a smart key system)
- Engine (ignition) switch (vehicles with a smart key system)
- Automatic transmission
- Turn signal lever
- Parking brake
- Horn
- Instrument cluster
- Operating the lights and wipers
- Operating the lights and wipers
- Using other driving systems
- Cruise control
- Intuitive parking assist
- Rear view monitor system (rear view mirror-attached type)
- Four-wheel drive system (part-time 4WD models)
- Four-wheel drive system (full-time 4WD models)
- Active traction control system
- AUTO LSD system (2WD models)
- Rear differential lock system
- Downhill assist control system
- Crawl Control
- Multi-terrain Select
- Driving assist systems
- Driving information
Child restraint systems with a top tether strap
Secure the child restraint system using a seat belt or the lower anchors, and
remove the head restraint.
Open the anchor bracket cover, latch the hook onto the anchor bracket and
tighten the ...
Other materials about Toyota 4Runner:
Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER BEARING
HINT:
Use the same procedure for all rear propeller shaft universal joint spider bearing.
(a) Place matchmarks on the flange yoke and sleeve yoke.
Text in Il ...
Test Mode Procedure
TEST MODE PROCEDURE
1. PERFORM SIGNAL CHECK
HINT:
When entering signal check mode, the tire pressure warning ECU stores
all the signal check DTCs first. After completing the signal check for each
inspection item, the DTCs for systems that ar ...
© 2016-2024 | www.to4runner.net
0.0307
0.0307